golden hour

/opt/saltstack/salt/lib/python3.10/site-packages/salt/modules

File/Folder	Size	Actions
__init__.py	35 B
__pycache__	-
acme.py	12.74 KB
aix_group.py	4.12 KB
aix_shadow.py	1.93 KB
aixpkg.py	24.15 KB
aliases.py	5.07 KB
alternatives.py	5.71 KB
ansiblegate.py	19.51 KB
apache.py	12.47 KB
apcups.py	2.15 KB
apf.py	3.09 KB
apkpkg.py	16 KB
aptly.py	15.28 KB
aptpkg.py	116.64 KB
archive.py	48.63 KB
arista_pyeapi.py	22.06 KB
artifactory.py	24.78 KB
at.py	10.72 KB
at_solaris.py	8.51 KB
augeas_cfg.py	13.93 KB
aws_sqs.py	6.55 KB
azurearm_compute.py	20.8 KB
azurearm_dns.py	15.8 KB
azurearm_network.py	82.99 KB
azurearm_resource.py	35.75 KB
bamboohr.py	7.36 KB
baredoc.py	11.13 KB
bcache.py	28.97 KB
beacons.py	27.82 KB
bigip.py	69.11 KB
bluez_bluetooth.py	6.76 KB
boto3_elasticache.py	37.34 KB
boto3_elasticsearch.py	53.17 KB
boto3_route53.py	39.82 KB
boto3_sns.py	12.93 KB
boto_apigateway.py	61.86 KB
boto_asg.py	35.69 KB
boto_cfn.py	7.95 KB
boto_cloudfront.py	12.75 KB
boto_cloudtrail.py	14.45 KB
boto_cloudwatch.py	10.99 KB
boto_cloudwatch_event.py	9.48 KB
boto_cognitoidentity.py	14.63 KB
boto_datapipeline.py	6.94 KB
boto_dynamodb.py	14.98 KB
boto_ec2.py	79.27 KB
boto_efs.py	14.05 KB
boto_elasticache.py	23.69 KB
boto_elasticsearch_domain.py	15.85 KB
boto_elb.py	35.53 KB
boto_elbv2.py	10.78 KB
boto_iam.py	75.62 KB
boto_iot.py	26.2 KB
boto_kinesis.py	19.62 KB
boto_kms.py	17.29 KB
boto_lambda.py	35.05 KB
boto_rds.py	34.92 KB
boto_route53.py	32.55 KB
boto_s3.py	4.24 KB
boto_s3_bucket.py	31.8 KB
boto_secgroup.py	25.22 KB
boto_sns.py	7.22 KB
boto_sqs.py	6.43 KB
boto_ssm.py	3.63 KB
boto_vpc.py	113.08 KB
bower.py	5.85 KB
bridge.py	10.81 KB
bsd_shadow.py	6.25 KB
btrfs.py	33.66 KB
cabal.py	3.79 KB
capirca_acl.py	40.04 KB
cassandra_cql.py	54.16 KB
cassandra_mod.py	4.3 KB
celery.py	3.33 KB
ceph.py	15.82 KB
chassis.py	1.52 KB
chef.py	4.66 KB
chocolatey.py	41.55 KB
chronos.py	2.89 KB
chroot.py	11.73 KB
cimc.py	23.02 KB
ciscoconfparse_mod.py	14.79 KB
cisconso.py	3.83 KB
cloud.py	9.39 KB
cmdmod.py	163.73 KB
composer.py	10.31 KB
config.py	16.98 KB
consul.py	69.3 KB
container_resource.py	12.94 KB
cp.py	31.98 KB
cpan.py	5.54 KB
cron.py	28.09 KB
cryptdev.py	10.08 KB
csf.py	16.04 KB
cyg.py	8.32 KB
daemontools.py	5.41 KB
data.py	3.85 KB
datadog_api.py	7.76 KB
ddns.py	7.12 KB
deb_apache.py	7.41 KB
deb_postgres.py	4.18 KB
debconfmod.py	4.06 KB
debian_ip.py	64.91 KB
debian_service.py	6.55 KB
debuild_pkgbuild.py	34.68 KB
defaults.py	6.55 KB
devinfo.py	9.07 KB
devmap.py	627 B
dig.py	8.75 KB
disk.py	30.82 KB
djangomod.py	7.53 KB
dnsmasq.py	5.71 KB
dnsutil.py	11.51 KB
dockercompose.py	32.62 KB
dockermod.py	224.85 KB
dpkg_lowpkg.py	12.94 KB
drac.py	10.97 KB
dracr.py	38.53 KB
drbd.py	7.19 KB
dummyproxy_pkg.py	2.46 KB
dummyproxy_service.py	2.91 KB
ebuildpkg.py	38.74 KB
eix.py	1.58 KB
elasticsearch.py	51.44 KB
environ.py	8.96 KB
eselect.py	4.99 KB
esxcluster.py	1.66 KB
esxdatacenter.py	1.68 KB
esxi.py	2.79 KB
esxvm.py	1.63 KB
etcd_mod.py	8.56 KB
ethtool.py	11.12 KB
event.py	7.67 KB
extfs.py	8.78 KB
file.py	232.18 KB
firewalld.py	20.51 KB
freebsd_sysctl.py	4.99 KB
freebsd_update.py	6.19 KB
freebsdjail.py	7.16 KB
freebsdkmod.py	6.17 KB
freebsdpkg.py	17.04 KB
freebsdports.py	13.13 KB
freebsdservice.py	12.53 KB
freezer.py	10.2 KB
gcp_addon.py	4.07 KB
gem.py	10.6 KB
genesis.py	21.75 KB
gentoo_service.py	9.18 KB
gentoolkitmod.py	8.39 KB
git.py	172.01 KB
github.py	53.19 KB
glanceng.py	4.69 KB
glassfish.py	19.49 KB
glusterfs.py	19.55 KB
gnomedesktop.py	6.85 KB
google_chat.py	1.52 KB
gpg.py	39.09 KB
grafana4.py	30.27 KB
grains.py	21.81 KB
groupadd.py	11.87 KB
grub_legacy.py	3.08 KB
guestfs.py	2.37 KB
hadoop.py	3.76 KB
haproxyconn.py	10.17 KB
hashutil.py	6.77 KB
heat.py	25.25 KB
helm.py	39.27 KB
hg.py	7.16 KB
highstate_doc.py	22.76 KB
hosts.py	10.47 KB
http.py	3.76 KB
icinga2.py	4.46 KB
idem.py	1.75 KB
ifttt.py	2.28 KB
ilo.py	15.98 KB
incron.py	7.68 KB
influxdb08mod.py	15.07 KB
influxdbmod.py	16.13 KB
infoblox.py	17.53 KB
ini_manage.py	14.63 KB
inspectlib	-
inspector.py	8.19 KB
introspect.py	4.02 KB
iosconfig.py	14.78 KB
ipmi.py	25.47 KB
ipset.py	17.97 KB
iptables.py	57.44 KB
iwtools.py	3.99 KB
jboss7.py	20.51 KB
jboss7_cli.py	15.23 KB
jenkinsmod.py	11.9 KB
jinja.py	2.66 KB
jira_mod.py	7.07 KB
junos.py	73.96 KB
k8s.py	24.87 KB
kapacitor.py	5.37 KB
kerberos.py	5.42 KB
kernelpkg_linux_apt.py	6.71 KB
kernelpkg_linux_yum.py	7.26 KB
key.py	1007 B
keyboard.py	2.64 KB
keystone.py	43.14 KB
keystoneng.py	21.82 KB
keystore.py	7.18 KB
kmod.py	7.65 KB
kubeadm.py	34.64 KB
kubernetesmod.py	46.77 KB
launchctl_service.py	9.69 KB
layman.py	4.22 KB
ldap3.py	18.81 KB
ldapmod.py	5.9 KB
libcloud_compute.py	23.48 KB
libcloud_dns.py	9.73 KB
libcloud_loadbalancer.py	13.14 KB
libcloud_storage.py	12.16 KB
linux_acl.py	7.7 KB
linux_ip.py	5.55 KB
linux_lvm.py	17.86 KB
linux_service.py	4.64 KB
linux_shadow.py	12.96 KB
linux_sysctl.py	7.5 KB
localemod.py	11.84 KB
locate.py	2.58 KB
logadm.py	9.44 KB
logmod.py	1.25 KB
logrotate.py	7.72 KB
lvs.py	11.54 KB
lxc.py	147.27 KB
lxd.py	90.07 KB
mac_assistive.py	11.37 KB
mac_brew_pkg.py	19.91 KB
mac_desktop.py	2.77 KB
mac_group.py	6.62 KB
mac_keychain.py	6.39 KB
mac_pkgutil.py	2.84 KB
mac_portspkg.py	11.36 KB
mac_power.py	13.29 KB
mac_service.py	19.64 KB
mac_shadow.py	14.23 KB
mac_softwareupdate.py	14.52 KB
mac_sysctl.py	5.13 KB
mac_system.py	15.07 KB
mac_timezone.py	8.34 KB
mac_user.py	16.41 KB
mac_xattr.py	6.27 KB
macdefaults.py	2.33 KB
macpackage.py	6.66 KB
makeconf.py	17.31 KB
mandrill.py	6.31 KB
marathon.py	5.36 KB
match.py	13 KB
mattermost.py	3.4 KB
mdadm_raid.py	9.86 KB
mdata.py	3.38 KB
memcached.py	6.13 KB
mine.py	18.84 KB
minion.py	7.68 KB
mod_random.py	7.18 KB
modjk.py	12.48 KB
mongodb.py	29.75 KB
monit.py	5.51 KB
moosefs.py	3.87 KB
mount.py	58.44 KB
mssql.py	14.64 KB
msteams.py	2.11 KB
munin.py	2.4 KB
mysql.py	90.66 KB
nacl.py	9.72 KB
nagios.py	6.53 KB
nagios_rpc.py	5.09 KB
namecheap_domains.py	12.84 KB
namecheap_domains_dns.py	5.93 KB
namecheap_domains_ns.py	4.51 KB
namecheap_ssl.py	25.69 KB
namecheap_users.py	2.4 KB
napalm_bgp.py	9.72 KB
napalm_formula.py	11.33 KB
napalm_mod.py	61.37 KB
napalm_netacl.py	28.59 KB
napalm_network.py	93.22 KB
napalm_ntp.py	10.22 KB
napalm_probes.py	13.25 KB
napalm_route.py	5.09 KB
napalm_snmp.py	7.05 KB
napalm_users.py	6.49 KB
napalm_yang_mod.py	20.28 KB
netaddress.py	1.6 KB
netbox.py	32.22 KB
netbsd_sysctl.py	3.92 KB
netbsdservice.py	6.43 KB
netmiko_mod.py	19.61 KB
netscaler.py	27.02 KB
network.py	63.42 KB
neutron.py	44.92 KB
neutronng.py	15.02 KB
nexus.py	22.95 KB
nfs3.py	3.9 KB
nftables.py	33.58 KB
nginx.py	3.83 KB
nilrt_ip.py	36.18 KB
nix.py	8.03 KB
nova.py	19.6 KB
npm.py	10.4 KB
nspawn.py	41.35 KB
nxos.py	24.65 KB
nxos_api.py	14.72 KB
nxos_upgrade.py	14.74 KB
omapi.py	3.6 KB
openbsd_sysctl.py	3.74 KB
openbsdpkg.py	10.97 KB
openbsdrcctl_service.py	6.33 KB
openbsdservice.py	8.31 KB
openscap.py	2.81 KB
openstack_config.py	3.21 KB
openstack_mng.py	2.71 KB
openvswitch.py	17.19 KB
opkg.py	49.67 KB
opsgenie.py	3.29 KB
oracle.py	5.82 KB
osquery.py	24.93 KB
out.py	2.53 KB
pacmanpkg.py	31.92 KB
pagerduty.py	4.7 KB
pagerduty_util.py	13.48 KB
pam.py	2.01 KB
panos.py	61.05 KB
parallels.py	19.85 KB
parted_partition.py	21.53 KB
pcs.py	14.11 KB
pdbedit.py	10.79 KB
pecl.py	3.79 KB
peeringdb.py	8.39 KB
pf.py	9.51 KB
philips_hue.py	1.55 KB
pillar.py	21.37 KB
pip.py	53.42 KB
pkg_resource.py	12.3 KB
pkgin.py	17.29 KB
pkgng.py	61.07 KB
pkgutil.py	9.85 KB
portage_config.py	22.73 KB
postfix.py	16.24 KB
postgres.py	88.24 KB
poudriere.py	7.85 KB
powerpath.py	2.57 KB
proxy.py	11.49 KB
ps.py	20.89 KB
publish.py	10.25 KB
puppet.py	10.9 KB
purefa.py	33.59 KB
purefb.py	13.69 KB
pushbullet.py	1.88 KB
pushover_notify.py	3.48 KB
pw_group.py	4.62 KB
pw_user.py	12.47 KB
pyenv.py	6.93 KB
qemu_img.py	1.53 KB
qemu_nbd.py	3.28 KB
quota.py	6.43 KB
rabbitmq.py	38.4 KB
rallydev.py	6.09 KB
random_org.py	23.76 KB
rbac_solaris.py	16.05 KB
rbenv.py	10.75 KB
rdp.py	6.08 KB
rebootmgr.py	7.68 KB
redismod.py	16.36 KB
reg.py	16.36 KB
rest_pkg.py	2.26 KB
rest_sample_utils.py	558 B
rest_service.py	3.63 KB
restartcheck.py	24.1 KB
restconf.py	3.15 KB
ret.py	1.27 KB
rh_ip.py	38.55 KB
rh_service.py	16.61 KB
riak.py	5.19 KB
rpm_lowpkg.py	27.67 KB
rpmbuild_pkgbuild.py	24.53 KB
rsync.py	8.04 KB
runit.py	17.17 KB
rvm.py	11.1 KB
s3.py	9.93 KB
s6.py	3.62 KB
salt_proxy.py	4.48 KB
salt_version.py	4.58 KB
saltcheck.py	46.66 KB
saltcloudmod.py	954 B
saltutil.py	57.49 KB
schedule.py	50.81 KB
scp_mod.py	6.22 KB
scsi.py	2.66 KB
sdb.py	2.48 KB
seed.py	8.87 KB
selinux.py	24.2 KB
sensehat.py	7.79 KB
sensors.py	1.3 KB
serverdensity_device.py	8.1 KB
servicenow.py	4.36 KB
slack_notify.py	7.83 KB
slackware_service.py	6.84 KB
slsutil.py	19.04 KB
smartos_imgadm.py	12.04 KB
smartos_nictagadm.py	6.46 KB
smartos_virt.py	5.21 KB
smartos_vmadm.py	26.2 KB
smbios.py	10.05 KB
smf_service.py	8.52 KB
smtp.py	5.41 KB
snapper.py	27.14 KB
solaris_fmadm.py	11.2 KB
solaris_group.py	2.8 KB
solaris_shadow.py	7.98 KB
solaris_system.py	3.72 KB
solaris_user.py	11.06 KB
solarisipspkg.py	18.68 KB
solarispkg.py	15.4 KB
solr.py	45.54 KB
solrcloud.py	14.63 KB
splunk.py	8.14 KB
splunk_search.py	8.76 KB
sqlite3.py	2.54 KB
ssh.py	43.89 KB
ssh_pkg.py	1.08 KB
ssh_service.py	3.39 KB
state.py	82.34 KB
status.py	57.79 KB
statuspage.py	14.67 KB
supervisord.py	11.15 KB
suse_apache.py	2.45 KB
suse_ip.py	35.72 KB
svn.py	10.75 KB
swarm.py	13.5 KB
swift.py	5.53 KB
sysbench.py	6.62 KB
sysfs.py	6.61 KB
syslog_ng.py	31.52 KB
sysmod.py	22.59 KB
sysrc.py	3.38 KB
system.py	19.28 KB
system_profiler.py	3.54 KB
systemd_service.py	46.29 KB
telegram.py	3.28 KB
telemetry.py	12.87 KB
temp.py	831 B
test.py	15.4 KB
test_virtual.py	237 B
testinframod.py	9.92 KB
textfsm_mod.py	16.22 KB
timezone.py	19.98 KB
tls.py	58.63 KB
tomcat.py	18.59 KB
trafficserver.py	10.44 KB
transactional_update.py	35.83 KB
travisci.py	2.05 KB
tuned.py	2.34 KB
twilio_notify.py	2.95 KB
udev.py	3.72 KB
upstart_service.py	16.92 KB
uptime.py	3.23 KB
useradd.py	22.63 KB
uwsgi.py	996 B
vagrant.py	20.4 KB
varnish.py	3.08 KB
vault.py	15.61 KB
vbox_guest.py	10.55 KB
vboxmanage.py	14.71 KB
vcenter.py	1.61 KB
victorops.py	6.54 KB
virt.py	287.71 KB
virtualenv_mod.py	15.09 KB
vmctl.py	9.56 KB
vsphere.py	380.41 KB
webutil.py	3.66 KB
win_auditpol.py	4.74 KB
win_autoruns.py	2.29 KB
win_certutil.py	4.55 KB
win_dacl.py	32.27 KB
win_disk.py	1.8 KB
win_dism.py	20.7 KB
win_dns_client.py	4.19 KB
win_dsc.py	27.54 KB
win_event.py	22.32 KB
win_file.py	64.39 KB
win_firewall.py	20.15 KB
win_groupadd.py	11.27 KB
win_iis.py	68.78 KB
win_ip.py	11.43 KB
win_lgpo.py	491.76 KB
win_lgpo_reg.py	17.9 KB
win_license.py	2.72 KB
win_network.py	13.9 KB
win_ntp.py	1.8 KB
win_path.py	11.12 KB
win_pkg.py	86.43 KB
win_pki.py	15.8 KB
win_powercfg.py	9.85 KB
win_psget.py	8.97 KB
win_servermanager.py	14.21 KB
win_service.py	32.96 KB
win_shadow.py	3.03 KB
win_shortcut.py	16.49 KB
win_smtp_server.py	17.67 KB
win_snmp.py	13.38 KB
win_status.py	16.94 KB
win_system.py	40.61 KB
win_task.py	79.17 KB
win_timezone.py	13.3 KB
win_useradd.py	27.39 KB
win_wua.py	38.29 KB
win_wusa.py	5.88 KB
winrepo.py	6.09 KB
wordpress.py	4.71 KB
x509.py	63.1 KB
x509_v2.py	74.15 KB
xapi_virt.py	24.07 KB
xbpspkg.py	15.84 KB
xfs.py	15.35 KB
xml.py	2.14 KB
xmpp.py	5.28 KB
yaml.py	1.94 KB
yumpkg.py	116.5 KB
zabbix.py	97.55 KB
zcbuildout.py	28.16 KB
zenoss.py	5.64 KB
zfs.py	34.44 KB
zk_concurrency.py	11.16 KB
znc.py	2.26 KB
zoneadm.py	15.05 KB
zonecfg.py	21.85 KB
zookeeper.py	14.72 KB
zpool.py	44.02 KB
zypperpkg.py	94.87 KB

Edit: pcs.py

"""
Configure a Pacemaker/Corosync cluster with PCS
===============================================

Configure Pacemaker/Cororsync clusters with the
Pacemaker/Cororsync conifguration system (PCS)

:depends: pcs

.. versionadded:: 2016.3.0
"""

import logging

import salt.utils.path

log = logging.getLogger(__name__)

def __virtual__():
    """
    Only load if pcs package is installed
    """
    if salt.utils.path.which("pcs"):
        return "pcs"
    return (False, "Missing dependency: pcs")

def __use_new_commands():
    """
    The command line arguments of pcs changed after version 0.10
    This will return True if the new arguments are needed and
    false if the old ones are needed
    """
    pcs_version = __salt__["pkg.version"]("pcs")
    log.debug("PCS package version %s", pcs_version)

if __salt__["pkg.version_cmp"](pcs_version, "0.10") == 1:
        log.debug("New version, new command")
        return True
    else:
        log.debug("Old Version")
        return False

def item_show(
    item, item_id=None, item_type=None, show="show", extra_args=None, cibfile=None
):
    """
    Show an item via pcs command
    (mainly for use with the pcs state module)

item
        config, property, resource, constraint etc.
    item_id
        id of the item
    item_type
        item type
    show
        show command (probably None, default: show or status for newer implementation)
    extra_args
        additional options for the pcs command
    cibfile
        use cibfile instead of the live CIB
    """

new_commands = __use_new_commands()

cmd = ["pcs"]

if isinstance(cibfile, str):
        cmd += ["-f", cibfile]

if isinstance(item, str):
        cmd += [item]
    elif isinstance(item, (list, tuple)):
        cmd += item

# constraint command follows a different order
    if item in ["constraint"]:
        cmd += [item_type]

# New implementions use config instead of show. This resolves that issue.
    if new_commands and (
        item != "config" and item != "constraint" and item != "property"
    ):
        if show == "show":
            show = "config"
        elif isinstance(show, (list, tuple)):
            for index, value in enumerate(show):
                if show[index] == "show":
                    show[index] = "config"

if isinstance(show, str):
        cmd += [show]
    elif isinstance(show, (list, tuple)):
        cmd += show

if isinstance(item_id, str):
        cmd += [item_id]

if isinstance(extra_args, (list, tuple)):
        cmd += extra_args

# constraint command only shows id, when using '--full'-parameter
    if item in ["constraint"]:
        if not isinstance(extra_args, (list, tuple)) or "--full" not in extra_args:
            cmd += ["--full"]
    log.debug("Running item show %s", cmd)
    return __salt__["cmd.run_all"](cmd, output_loglevel="trace", python_shell=False)

def item_create(
    item, item_id, item_type, create="create", extra_args=None, cibfile=None
):
    """
    Create an item via pcs command
    (mainly for use with the pcs state module)

item
        config, property, resource, constraint etc.
    item_id
        id of the item
    item_type
        item type
    create
        create command (create or set f.e., default: create)
    extra_args
        additional options for the pcs command
    cibfile
        use cibfile instead of the live CIB
    """
    cmd = ["pcs"]
    if isinstance(cibfile, str):
        cmd += ["-f", cibfile]

if isinstance(item, str):
        cmd += [item]
    elif isinstance(item, (list, tuple)):
        cmd += item

# constraint command follows a different order
    if item in ["constraint"]:
        if isinstance(item_type, str):
            cmd += [item_type]

if isinstance(create, str):
        cmd += [create]
    elif isinstance(create, (list, tuple)):
        cmd += create

# constraint command needs item_id in format 'id=<id' after all params
    # constraint command follows a different order
    if item not in ["constraint"]:
        cmd += [item_id]
        if isinstance(item_type, str):
            cmd += [item_type]

if isinstance(extra_args, (list, tuple)):
        # constraint command needs item_id in format 'id=<id' after all params
        if item in ["constraint"]:
            extra_args = extra_args + ["id={}".format(item_id)]
        cmd += extra_args

return __salt__["cmd.run_all"](cmd, output_loglevel="trace", python_shell=False)

def auth(nodes, pcsuser="hacluster", pcspasswd="hacluster", extra_args=None):
    """
    Authorize nodes to the cluster

nodes
        a list of nodes which should be authorized to the cluster
    pcsuser
        user for communitcation with PCS (default: hacluster)
    pcspasswd
        password for pcsuser (default: hacluster)
    extra_args
        list of extra option for the \'pcs cluster auth\' command. The newer cluster host command has no extra args and so will ignore it.

CLI Example:

.. code-block:: bash

salt '*' pcs.auth nodes='[ node1.example.org, node2.example.org ]' pcsuser=hacluster pcspasswd=hoonetorg extra_args=[ '--force' ]
    """
    if __use_new_commands():
        cmd = ["pcs", "host", "auth"]
    else:
        cmd = ["pcs", "cluster", "auth"]

cmd.extend(["-u", pcsuser, "-p", pcspasswd])

if not __use_new_commands() and isinstance(extra_args, (list, tuple)):
        cmd += extra_args

cmd += nodes

return __salt__["cmd.run_all"](cmd, output_loglevel="trace", python_shell=False)

def is_auth(nodes, pcsuser="hacluster", pcspasswd="hacluster"):
    """
    Check if nodes are already authorized

nodes
        a list of nodes to be checked for authorization to the cluster
    pcsuser
        user for communitcation with PCS (default: hacluster)
    pcspasswd
        password for pcsuser (default: hacluster)

CLI Example:

.. code-block:: bash

salt '*' pcs.is_auth nodes='[node1.example.org, node2.example.org]' pcsuser=hacluster pcspasswd=hoonetorg
    """
    if __use_new_commands():
        cmd = ["pcs", "host", "auth", "-u", pcsuser, "-p", pcspasswd]
    else:
        cmd = ["pcs", "cluster", "auth"]

cmd += nodes

return __salt__["cmd.run_all"](
        cmd, stdin="\n\n", output_loglevel="trace", python_shell=False
    )

def cluster_setup(nodes, pcsclustername="pcscluster", extra_args=None):
    """
    Setup pacemaker cluster via pcs command

nodes
        a list of nodes which should be set up
    pcsclustername
        Name of the Pacemaker cluster (default: pcscluster)
    extra_args
        list of extra option for the \'pcs cluster setup\' command

CLI Example:

.. code-block:: bash

salt '*' pcs.cluster_setup nodes='[ node1.example.org, node2.example.org ]' pcsclustername=pcscluster
    """
    cmd = ["pcs", "cluster", "setup"]

if __use_new_commands():
        cmd += [pcsclustername]
    else:
        cmd += ["--name", pcsclustername]

cmd += nodes
    if isinstance(extra_args, (list, tuple)):
        cmd += extra_args

log.debug("Running cluster setup: %s", cmd)

return __salt__["cmd.run_all"](cmd, output_loglevel="trace", python_shell=False)

def cluster_destroy(extra_args=None):
    """
    Destroy corosync cluster using the pcs command

extra_args
        list of extra option for the \'pcs cluster destroy\' command (only really --all)

CLI Example:

.. code-block:: bash

salt '*' pcs.cluster_destroy extra_args=--all
    """
    cmd = ["pcs", "cluster", "destroy"]

if isinstance(extra_args, (list, tuple)):
        cmd += extra_args

log.debug("Running cluster destroy: %s", cmd)

return __salt__["cmd.run_all"](cmd, output_loglevel="trace", python_shell=False)

def cluster_node_add(node, extra_args=None):
    """
    Add a node to the pacemaker cluster via pcs command

node
        node that should be added
    extra_args
        list of extra option for the \'pcs cluster node add\' command

CLI Example:

.. code-block:: bash

salt '*' pcs.cluster_node_add node=node2.example.org
    """
    cmd = ["pcs", "cluster", "node", "add"]

cmd += [node]
    if isinstance(extra_args, (list, tuple)):
        cmd += extra_args

return __salt__["cmd.run_all"](cmd, output_loglevel="trace", python_shell=False)

def cib_create(cibfile, scope="configuration", extra_args=None):
    """
    Create a CIB-file from the current CIB of the cluster

cibfile
        name/path of the file containing the CIB
    scope
        specific section of the CIB (default: configuration)
    extra_args
        additional options for creating the CIB-file

CLI Example:

.. code-block:: bash

salt '*' pcs.cib_create cibfile='/tmp/VIP_apache_1.cib' scope=False
    """
    cmd = ["pcs", "cluster", "cib", cibfile]
    if isinstance(scope, str):
        cmd += ["scope={}".format(scope)]
    if isinstance(extra_args, (list, tuple)):
        cmd += extra_args

return __salt__["cmd.run_all"](cmd, output_loglevel="trace", python_shell=False)

def cib_push(cibfile, scope="configuration", extra_args=None):
    """
    Push a CIB-file as the new CIB to the cluster

cibfile
        name/path of the file containing the CIB
    scope
        specific section of the CIB (default: configuration)
    extra_args
        additional options for creating the CIB-file

CLI Example:

.. code-block:: bash

salt '*' pcs.cib_push cibfile='/tmp/VIP_apache_1.cib' scope=False
    """
    cmd = ["pcs", "cluster", "cib-push", cibfile]
    if isinstance(scope, str):
        cmd += ["scope={}".format(scope)]
    if isinstance(extra_args, (list, tuple)):
        cmd += extra_args

return __salt__["cmd.run_all"](cmd, output_loglevel="trace", python_shell=False)

def config_show(cibfile=None):
    """
    Show config of cluster

cibfile
        name/path of the file containing the CIB

CLI Example:

.. code-block:: bash

salt '*' pcs.config_show cibfile='/tmp/cib_for_galera'
    """
    return item_show(item="config", item_id=None, extra_args=None, cibfile=cibfile)

def prop_show(prop, extra_args=None, cibfile=None):
    """
    Show the value of a cluster property

prop
        name of the property
    extra_args
        additional options for the pcs property command
    cibfile
        use cibfile instead of the live CIB

CLI Example:

.. code-block:: bash

salt '*' pcs.prop_show cibfile='/tmp/2_node_cluster.cib' prop='no-quorum-policy' cibfile='/tmp/2_node_cluster.cib'
    """
    return item_show(
        item="property", item_id=prop, extra_args=extra_args, cibfile=cibfile
    )

def prop_set(prop, value, extra_args=None, cibfile=None):
    """
    Set the value of a cluster property

prop
        name of the property
    value
        value of the property prop
    extra_args
        additional options for the pcs property command
    cibfile
        use cibfile instead of the live CIB

CLI Example:

.. code-block:: bash

salt '*' pcs.prop_set prop='no-quorum-policy' value='ignore' cibfile='/tmp/2_node_cluster.cib'
    """
    return item_create(
        item="property",
        item_id="{}={}".format(prop, value),
        item_type=None,
        create="set",
        extra_args=extra_args,
        cibfile=cibfile,
    )

def stonith_show(stonith_id, extra_args=None, cibfile=None):
    """
    Show the value of a cluster stonith

stonith_id
        name for the stonith resource
    extra_args
        additional options for the pcs stonith command
    cibfile
        use cibfile instead of the live CIB

CLI Example:

.. code-block:: bash

salt '*' pcs.stonith_show stonith_id='eps_fence' cibfile='/tmp/2_node_cluster.cib'
    """
    return item_show(
        item="stonith", item_id=stonith_id, extra_args=extra_args, cibfile=cibfile
    )

def stonith_create(
    stonith_id, stonith_device_type, stonith_device_options=None, cibfile=None
):
    """
    Create a stonith resource via pcs command

stonith_id
        name for the stonith resource
    stonith_device_type
        name of the stonith agent fence_eps, fence_xvm f.e.
    stonith_device_options
        additional options for creating the stonith resource
    cibfile
        use cibfile instead of the live CIB for manipulation

CLI Example:

.. code-block:: bash

salt '*' pcs.stonith_create stonith_id='eps_fence' stonith_device_type='fence_eps'
                                    stonith_device_options="['pcmk_host_map=node1.example.org:01;node2.example.org:02', 'ipaddr=myepsdevice.example.org', 'action=reboot', 'power_wait=5', 'verbose=1', 'debug=/var/log/pcsd/eps_fence.log', 'login=hidden', 'passwd=hoonetorg']" cibfile='/tmp/cib_for_stonith.cib'
    """
    return item_create(
        item="stonith",
        item_id=stonith_id,
        item_type=stonith_device_type,
        extra_args=stonith_device_options,
        cibfile=cibfile,
    )

def resource_show(resource_id, extra_args=None, cibfile=None):
    """
    Show a resource via pcs command

resource_id
        name of the resource
    extra_args
        additional options for the pcs command
    cibfile
        use cibfile instead of the live CIB

CLI Example:

.. code-block:: bash

salt '*' pcs.resource_show resource_id='galera' cibfile='/tmp/cib_for_galera.cib'
    """
    return item_show(
        item="resource", item_id=resource_id, extra_args=extra_args, cibfile=cibfile
    )

def resource_create(resource_id, resource_type, resource_options=None, cibfile=None):
    """
    Create a resource via pcs command

resource_id
        name for the resource
    resource_type
        resource type (f.e. ocf:heartbeat:IPaddr2 or VirtualIP)
    resource_options
        additional options for creating the resource
    cibfile
        use cibfile instead of the live CIB for manipulation

CLI Example:

.. code-block:: bash

salt '*' pcs.resource_create resource_id='galera' resource_type='ocf:heartbeat:galera' resource_options="['wsrep_cluster_address=gcomm://node1.example.org,node2.example.org,node3.example.org', '--master']" cibfile='/tmp/cib_for_galera.cib'
    """
    return item_create(
        item="resource",
        item_id=resource_id,
        item_type=resource_type,
        extra_args=resource_options,
        cibfile=cibfile,
    )